Preparation1. Carefully read the technical documentation of the bearing seat to understand the structure, performance and installation requirements of the bearing seat.2. Check whether the required tools and materials are complete, including bolts, nuts, washers, lubricants, etc.3. Ensure that the i

Cast iron square bearing seatCast iron square bearing seat is a more common type with high strength, good wear resistance and strong load-bearing capacity. Cast iron square bearing seats have low manufacturing costs and are widely used in light-load and low-speed equipment, such as agricultural mach

Advantages of square bearing seats1. Excellent material: Square bearing seats are mostly made of high-quality cast iron, which has high hardness, strength and wear resistance, ensuring its long service life.2. Reasonable structure: The structural design of the square bearing seat is relatively simpl

There are two main aspects in the selection of bearings: First, choose the type of bearing. You should roughly consider the load size, direction, and whether there is any impact? Factors such as speed, alignment requirements, allowed space, etc. The second is to choose the accuracy of the bearing. T

The current market demand for bearing seats is high, which is often accompanied by some bearing failures. Most of the failure modes are wear life, abrasion life, fatigue life and lubrication life, etc. These are calculated and calculated based on the corresponding data. Evaluated.Regarding the four

Bearings are common components in mechanical equipment. Their role is to support and rotate the shafts in mechanical equipment. Due to prolonged use and wear, bearings can fail and need to be repaired. Here are some common ways to repair bearings.1.Replace bearingsIf the bearing has been severely da

1. Support and positioning: Mounted bearings can provide support and positioning functions for the shaft, allowing the shaft to rotate stably in its axial direction and prevent deviation and swing.2. Transfer load: Bearings with seats can withstand various loads on the shaft, including radial force,