1. Keep clean: Ensure the cleanliness of the bearings and their surroundings to prevent dust, impurities and other pollutants from entering the bearings and causing wear and damage.2. Correct installation: When installing bearings, special tools should be used and the correct installation steps and

There are many factors that affect the service life of agricultural machinery bearings. Here are some of the main factors:1. Load: High load may cause bearing overload, which will accelerate its wear and fatigue failure. Therefore, appropriate safety factors and load limits should be considered in t

Determining whether a bearing needs to be replaced usually involves an assessment of the bearing's performance, wear condition, and overall health. Here are some common ways to tell if a bearing needs to be replaced:1. Listen to the sound:If a running bearing makes a sharp hissing sound, a metallic

1. Contact fatigue failure: refers to the material fatigue failure caused by the alternating stress on the working surface of the bearing.2. Wear failure: refers to the failure caused by the continuous wear of the metal on the working surface due to the relative sliding friction between the surfaces

The current market demand for bearing seats is high, which is often accompanied by some bearing failures. Most of the failure modes are wear life, abrasion life, fatigue life and lubrication life, etc. These are calculated and calculated based on the corresponding data. Evaluated.Regarding the four

The harm of moisture is reflected in two aspects: direct damage to metal surfaces, and damage to lubricating oil/grease, which indirectly leads to bearing damage.Moisture will cause corrosion on metal surfaces. For lubricating oils and greases, moisture will cause the base oil in the oil to oxidize

As a branch of mechanical equipment, three-dimensional garages are also inseparable from the use of bearings. FXM Bearings provides various shafts that can meet the needs of various three-dimensional garages.Bearing solutions. We also provide standard industry size products and customized soluti

The preparation work, the method of installing the bearing on the shaft, and the installation of the bearing seat are the same as the standard product.1. Fill with greaseIn order to enhance the effect of dustproof and waterproof, the rubber sealing lip inside the terminal cover and the internal spac

It can be seen from the historical progress that manufacturing is the mainstay of the social economy, although the current transformation and upgrading of manufacturing in various countriesThe focus of the strategic planning is different, but the transition from traditional manufacturing to intellig